Reabilitação oral com próteses parciais removíveis após restabelecimento de dimensão vertical de oclusão e tratamento multidisciplinar: relato de caso / Oral rehabilitation with removable partial dentures after restoration of the vertical dimension of occlusion and multidisciplinary treatment: case report

As próteses parciais removíveis (PPRs) são uma alternativa de tratamento viável na prática clínica para reabilitar arcos parcialmente desdentados. Entretanto, o planejamento dessas próteses e preparo bucal prévio são frequentemente negligenciados. O presente artigo tem como objetivo relatar o caso clínico de uma reabilitação oral com PPRs superior e inferior após abordagem multidisciplinar, de modo a enfatizar as fases de um planejamento criterioso e de preparo prévio dos dentes pilares, visando o sucesso e a longevidade da reabilitação. Paciente do sexo masculino de 57 anos de idade compareceu à clínica da Faculdade de Odontologia de Bauru, Universidade de São Paulo, queixando-se da estética de seu sorriso e de algumas ausências dentárias. O indivíduo utilizava uma PPR provisória inferior insatisfatória e apresentava perda de dimensão vertical de oclusão (DVO). Após o exame clínico, radiográfico e estudo do caso em articulador semi-ajustável, realizou-se o planejamento com abordagens restauradoras, endodônticas, periodontais e protéticas. Após tratamento periodontal, foi realizada endodontia dos elementos 12, 15 e 47, confecção de núcleos e coroas nos dentes 12 e 15, restauração a nível gengival para apoio residual no dente 47, restaurações nos dentes 11, 13, 22, 24 e 44 e, por fim, a confecção das PPRs superior e inferior. A abordagem multidisciplinar utilizada neste caso clínico viabilizou o restabelecimento da DVO e possibilitou o sucesso da reabilitação protética(AU)

Removable partial dentures (RPDs) are a viable treatment alternative in clinical practice to rehabilitate partially edentulous arches. However, the planning of these dentures and prior oral preparation are often neglected. This article aims to report the clinical case of an oral rehabilitation with upper and lower RPDs after a multidisciplinary approach, to emphasize the phases of careful planning and prior preparation of the abutment teeth, aiming at the success and longevity of the rehabilitation. A 57-year-old male patient came to the clinic of the Bauru School of Dentistry, University of São Paulo, complaining about the esthetics of his smile and some missing teeth. The subject was using an unsatisfactory lower provisional prosthesis and had a loss of vertical dimension of occlusion (OVD). After the clinical and radiographic examination and the case study in a semi-adjustable articulator, planning was carried out with restorative, endodontic, periodontal and prosthetic approaches. After periodontal treatment, endodontics were performed on elements 12, 15 and 47, creation of cores and crowns on teeth 12 and 15, restoration at the gingival level for residual support on tooth 47, restorations on teeth 11, 13, 22, 24 and 44 and, finally, the making of the upper and lower PPRs. The multidisciplinary approach used in this clinical case enabled the restoration of the OVD and enabled the success of the oral rehabilitation(AU)

Desarrollo y aplicación de un software educativo bidimensional para el proceso de enseñanza del diseño de Prótesis Parcial Removible / Validation of a two-dimensional educational software for the learning process of the design of Removable Partial Dentures

Objetivo: El objetivo de este estudio fue desarrollar e implementar un software educativo bidimensional para el proceso de aprendizaje del diseño de Prótesis Parciales Removibles.Materiales y métodos: Se utilizó el método científico y procedimientos de evaluación educativa para abordar las necesidades de la asignatura de Prótesis Parcial Removible en la Facultad de Odontología de la UNMSM de Perú en el año 2022. Se utilizó análisis, síntesis y encuestas. Se examinó la aplicabilidad del software y el cumplimiento de los requerimientos de enseñanza y aprendizaje, no sólo en la UNMSM sino en cualquier universidad con requerimientos y características similares. Resultados: La aplicación in-terna del software arrojó un valor final del 96%, mientras que la evaluación de alumnos y docentes mostró un 90% de aceptación, al considerar que el SEDUPPR es sencillo para instalar, sencillo en su manejo y funcionamiento, y es muy útil para aprender diseño de PPR. Conclusiones: El software educativo bidimensional diseñado para el proceso de aprendizaje de Prótesis Parcial Removible es aplicable y puede ser implementado en diferentes ámbitos educativos.

Objective: The objective of this study was to develop and implement a two-dimensional educational software for the learning process of designing Removable Partial Prostheses.Materials and Methods: The scientific method and educational evaluation procedures were utilized to address the needs of the Removable Partial Prosthesis subject in the Fa-culty of Dentistry at the UNMSM in Peru in 2022. Analysis, synthesis, and surveys were used. The software's applicability and fulfillment of teaching and learning requirements were examined, not only at the UNMSM but also in any university with similar require-ments and characteristics. Results: The internal application of the software yielded a final value of 96%, while the evaluation of students and teachers showed a 90% acceptance rate, considering that SEDUPPR is simple to install, easy to use and operate, and is very useful for learn PPR design. Conclusion: The two-dimensional educational software designed for the learning process of Removable Partial Prosthesis is applicable and can be implemented in different educational settings.

The effect of different framework's material on strain induced in distal abutment in mandibular Kennedy's class II: an in-vitro study / O efeito de diferentes materiais de estrutura na deformação induzida na distal do pilar da classe II de Kennedy mandibular: um estudo in vitro

Objective: This study aims to compare the strain induced in the supporting structures of unilateral mandibular removable partial denture frameworks retained by extra-coronal attachments fabricated with three different materials. Material and Methods: Three mandibular class II digitally designed and printed acrylic models with detachable abutments were used to fabricate three removable partial denture framework with extra coronal attachments from three different materials. A total of 33 models were prepared for strain testing (n=11). Models were divided into three groups according to framework's material: porcelain fused to cobalt chromium (PFM), polyetherketoneketone (PEKK) and polyetheretherketone (PEEK) group. Unilateral load of 60 N was applied in the three groups and strains were measured around the main abutment and saddle area using strain gauge. Results: Statistical analysis was performed using Shapiro-Wilk's test and by checking data distribution. Data were found to be non-parametric and were analysed using Kruskal-Wallis test followed by Dunn's post hoc test with Bonferroni correction. PFM group showed significantly the highest strain values around abutment, slot 1 (1mm distal to the socket of the last abutment) and slot 2 (1 cm away from slot 1) respectively (843.00±23.08, 91.00±6.52 and 1274.00±65.71) than the other tested groups (p<0.05) at same tested sites respectively followed by PEKK group (384.00±37.48, 81.00±2.24 and 135.00±0.00) and PEEK group (29.00±4.18, 63.00±4.47 and 52.00±5.70). Conclusions: PEEK and PEKK for partial denture framework with extra coronal attachments are adequate alternative to PFM due to their good mechanical response applying less strain on supportive structures in free-end cases. PEEK induces lower strain magnitude on the supporting structures when compared to PEKK. (AU)

Objetivo: Este estudo tem como objetivo comparar a tensão induzida nas estruturas de suporte de estruturas de próteses parciais removíveis mandibulares unilateraisretidas por encaixes extracoronários fabricados com três materiais diferentes. Material e Métodos: Três modelos mandibulares de classe II digitalmente projetados e impressos em acrílico com pilares destacáveis foram usados para fabricar três estruturas de próteses parciais removíveis com encaixes extracoronários de três materiais diferentes. Um total de 33 modelos foram preparados para testes de deformação (n=11). Os modelos foram divididos em três grupos de acordo com o material da estrutura: porcelana fundida com cobalto-cromo (PFM), poliétercetonacetona (PEKK) e polieteretercetona (PEEK). Carga unilateral de 60 N foi aplicada nos três grupos e as deformações foram medidas em torno do pilar principal e área de sela usando medido de tensão. Resultados: A análise estatística foi realizada por meio do teste de Shapiro-Wilk e com a verificação da distribuição dos dados. Os dados mostraram-se não paramétricos e foram analisados pelo teste de Kruskal-Wallis seguido pelo de Dunn com correção de Bonferroni. O grupo PFM mostrou significativamente os maiores valores de tensão ao redor do pilar, slot 1 (1mm distal do último pilar) e slot 2 (1 cm de distância do slot 1) respectivamente (843,00±23,08, 91,00±6,52 e 1274,00±65,71) do que os outros grupos testados (p<0,05) nos mesmos locais testados, respectivamente, seguido pelo grupo PEKK (384,00±37,48, 81,00±2,24 e 135,00±0,00) e grupo PEEK (29,00±4,18, 63,00±4,47 e 52,00±5,70). Conclusão: PEEK e PEKK para estrutura de prótese parcial com encaixes extracoronários são alternativas adequadas ao PFM devido à sua boa resposta mecânica aplicando menos tensão nas estruturas de suporte em casos de extremidade livre. O PEEK induz menor magnitude de deformação nas estruturas de suporte quando comparado ao PEKK (AU)

Application prospect of polyetheretherketone in postcore crown restorations / 口腔疾病防治

@#Polyetheretherketone (PEEK) is known as a high-grade engineering plastic with good mechanical properties, chemical stability and biocompatibility. Currently, PEEK materials have been widely used in prosthodontics, such as complete dentures and removable partial dentures. The relevant research shows that PEEK posts are superior to glass fiber posts, which have high tensile bond strength and bending strength. At present, few case reports of PEEK postcores have been published, and clinical case reports suggest that PEEK postcores have good oral prosthetic aesthetics and are ideal and reliable postcore crown materials. However, the preparation and surface treatment methods of PEEK require further refinement. A review of the related properties of PEEK and the prospects of its application in the field of postcore crown restoration will be presented in this paper.

Application of a metal occlusal surface and split framework in the treatment of a patient with mandibular distal extension absence and insufficient occlusogingival distance / 口腔疾病防治

Objective@# To investigate the effect of a metal occlusal surface and stress interruption design on minimally invasive prosthodontics for patients with distal extension absence and insufficient occlusal gingival distance.@*Methods @# We retrospectively studied the case of minimally invasive prosthodontic (Vitallium 2000) combined with a metal occlusal surface for distal extension absence in a patient with insufficient occlusal gingival distance; the stress breaking design and pressure impression technology are examined, and relevant articles are reviewd. @*Results@#The design effectively solves the problems of insufficient occlusal gingival distance, large occlusal force and easy denture fracture. Reviewing the relevant literature, stress interruption design can effectively protect abutment teeth, but the behavior of stress interruption design and stress conduction phenomena in the mouths of patients has not been reported. The T-scan test results of this study showed that before and after wearing the denture, the occlusal force distribution ratio of the patient changed from 77.5% on the left and 22.5% on the right to 61.3% on the left and 38.7% on the right. The occlusal force distribution ratio of the right dentition to the total occlusal force increased by 16.2%, and the occlusal force became better distributed. Further analysis showed that the occlusal forces on the left and right sides were nearly the same in the initial occlusion stage. As the occlusal force was further increased, the proportion of the occlusal force on the right side decreased in the middle of the occlusion stage and further decreased in the final occlusion stage until it reached a dynamic balance. The above T-scan test and literature review results suggest that this dynamic balance phenomenon of bite force is related to the stress interruption design and the stress conduction effect of the split framework.@* Conclusion @#The composite of stress interruption design and metal occlusal surface allows for minimally invasive prosthodontics for the treatment of distal extension absence in patients with insufficient occlusal gingival distance.

Evaluation of methods for fitness of removable partial denture / 北京大学学报(医学版)

OBJECTIVE@#To compare the differences and indications of three evaluation methods for fitness evaluation of removable partial denture (RPD).@*METHODS@#A RPD was fabricated and seated on the stone cast of a partially edentulous mandible, and the spaces between RPD and stone cast were recorded with polyvinyl siloxane (PVS) impression material forming PVS replicas. Using cross sectional measurement, the average thicknesses of PVS replicas were measured under stereomicroscope with different numbers of selected measuring points in the denture base, major connector, occlusal rest of the RPD, and the average thicknesses of the PVS replicas measured with different numbers of measuring points were compared using one-way analysis of variance (ANOVA) and independent sample t test. Three kinds of method, including cross sectional measurement, three-dimensional analysis on the stone cast, and three-dimensional analysis on the polyether cast, were applied to measure the average thicknesses of the PVS replicas, and the average thicknesses of the PVS replicas measured by these three evaluation methods were compared with ANOVA.@*RESULTS@#For cross sectional measurement, statistically significant differences were found in the average thicknesses of the PVS replicas in the denture base and the major connector among the different numbers of measuring points (P < 0.05), but no differences were found in the average thicknesses of the PVS replicas in the occlusal rest (P>0.05). There were significant differences among the average thicknesses of the PVS replicas measured by these three evaluation methods in each component of the RPD (P < 0.01). The average thickness measured by three-dimensional analysis on the stone cast and three-dimensional analysis on polyether cast were smaller than that measured by cross sectional measurement (P < 0.05). And there were no differences between the average thicknesses of PVS replicas measured by three-dimensional analysis on stone cast and three-dimensional analysis on polyether cast (P>0.05).@*CONCLUSION@#For cross sectional measurement, the average thickness of the PVS replicas was influenced by the number of measuring points, and the measurement accuracy of cross sectional measurement was not reliable enough. Three-dimensional analysis on stone cast which is suitable for evaluation in vitro and three-dimensional analysis on polyether cast which is suitable for evaluation in vivo can evaluate the fitness of RPD more comprehensively and effectively than that of cross sectional measurement.

The Significance of Knowledge, Instructions, Habits and Denture Hygiene Practice in Relation to the Maintenance of Denture Hygiene at Hospital USM’s Dental Clinic

ABSTRACT@#Good denture hygiene is crucial for the prevention of various periodontal diseases, dental caries and dental stomatitis, which can give rise to a negative impact on the general health of denture users. A comparison exercise was conducted, to determine the effectiveness of information on denture care, provided by different groups of dental personnel. A self-administered and structured questionnaire was distributed to patients who attended Hospital USM’s dental clinics, from 2014 to 2019 based on the attendance register of the clinic. The denture hygiene status of 100 participants was assessed during the interview session. The results derived through the questionnaire revealed that 100% of the respondents, who received both verbal and written instructions, practiced good dental hygiene. It was observed that the most effective instructions received by the respondents were delivered by the dental specialists. Respondents, who clean their dentures with denture cleaning tablets, soap, or denture cleaning paste, were observed to possess better denture hygiene than those who do not. Also, respondents who visit their dentists once every six months for routine dental examinations boasted a higher percentage of good denture hygiene (81.8%). A positive association was perceived, between knowledge and the status of denture hygiene.

Implant- and tooth-supported removable partial dentures: a case report / Prótese parcial removível sobre implante e dentes: relato de caso clínico

ABSTRACT This study aimed to report treatment of a patient with Kennedy's class l maxillary and class II mandibular arch with removable partial dentures supported on an external hexagon (HE) anterior type implant of regular diameter fitted with an O'ring type of attachment. This clinical case reports the oral rehabilitation of a senile patient whose clinical examination revealed missing dentition in the upper and lower arches, attrition of the lower anterior teeth, caries, and motor impairment affecting hygiene, mastication, and esthetic functions. Due to few severely impaired teeth, the pre-prosthetic preparation included extractions and restorations, followed by the fabrication of upper and lower removable partial dentures supported by an HE-type implant. This study is important because it addresses the current challenges faced in the implementation of treatment involving removable partial dentures combined with implants, which is a topic that still needs long-term follow-up and research.

RESUMO Este trabalho tem por objetivo relatar o tratamento reabilitador com próteses removíveis classe l de Kennedy superior e classe ll de Kennedy inferior associada a um implante de diâmetro regular, do tipo hexágono externo (HE) superior anterior, com o sistema de encaixe do tipo O'ring. O presente trabalho, relata um caso clínico em reabilitação oral em um paciente senil no qual apresentava ao exame clínico ausências dentárias no arco superior e inferior, desgaste por atrição nos dentes anteriores inferiores, cáries e comprometimento motor, prejudicando a higienização, função mastigatória e estética. Em virtude do grau de comprometimento de alguns dentes, o preparo pré-protético foi realizado com exodontias, restaurações e, por fim, a confecção de próteses parciais removíveis inferior e superior conjugada com um implante do tipo HE. O presente estudo é importante porque aborda os desafios atuais da implantação da prótese parcial removível combinada com o implante, um tema que ainda necessita de pesquisas de acompanhamento a longo prazo.

Application of intraoral scanning and 3D printing in the manufacture of removable partial dentures / 中国组织工程研究

BACKGROUND: There is no mature computer-aided design and manufacturing system for the preparation of removable partial denture in China so far. There is no report involving large sample size. Most of the existing studies only investigated the wear effect of a few cases, and there is a need to accumulate and enrich clinical data. OBJECTIVE: To explore the application value of intraoral scanning and 3D printing in the manufacture of removable partial dentures for patients. METHODS: Sixty-three patients with Kennedy class I dentition defect who received treatment in the Shanghai Ninth People’s Hospital, Shanghai JiaoTong University School of Medicine, China were included in this study. These patients consisted of 29 males and 34 females and were aged 44-63 years. In the study group, 23 patients were treated with denture scaffolds by intraoral scanning and three-dimensional printing, while in the control group, 40 patients were treated with denture scaffolds by traditional impression. The wear effect was compared between two groups after repair. The masticatory efficiency was compared between two groups before and 6, 12 and 24 months after repair. At the last follow-up, patients' satisfaction and complications were compared between the study and control groups. This study was approved by Shanghai Ninth People’s Hospital, Shanghai JiaoTong University School of Medicine (approval No. TJBDYY-2014-13-R1) in March, 2014. RESULTS AND CONCLUSION: The fitness (96% vs. 70%), retention (83% vs. 58%) and stability index (83% vs. 53%) of the study group were significantly higher than those of the control group (all P 0.05). At 12 and 24 months after repair, the masticatory efficiency in the study group was significantly higher than that in the control group (P 0.05). These results suggest that intraoral scanning and 3D printing could obtain a more accurate stent model in the manufacture of partial dentures compared with traditional impression, thereby has a higher application value.

A technique to design the framework of removable partial denture by multi-stage expert system / 华西口腔医学杂志

This study aims to apply a new expert system to design removable partial denture (RPD) framework. The RPD design is completed in three steps, namely, "selecting missing teeth", "selecting abutment condition", and "selecting personalized clasp". The system can help auxiliary dentists develop personalized treatment plans to reduce their clinical workload. It can also generate a dental preparation guideline for clinical preparation, which can prevent tooth preparation mistakes. By generating the standard electronic drawings of the framework design, the system can reduce the inconvenience caused by manual drawing, thereby facilitating dentist-technician communication and reducing the rate of remade.

Implant-assisted removable partial denture using freely removable abutment in a fully edentulous patient: A case report / 대한치과보철학회지

Implant-Assisted Removable Partial Dentures (IARPDs) treatment is being performed in a fully edentulous patient using implant surveyed prosthesis as an abutment. Implant-supported prosthesis as an abutment of IARPDs is classified into screw-retained and cement-retained type according to the retention type, and each has advantages and disadvantages. The EZ crown system (Samwon DMP, Yangsan, Korea) has a cylinder combined with abutment, and the nickel-titanium spring in this cylinder provides a constant force on the zirconia ball to obtain retention in EZ crown system. In this patient, the natural abutment teeth of the mandibular overdenture was hopeless. We planned implant assisted removable partial denture using anterior implant surveyed prosthesis considering functional and esthetical rehabilitation, cost and patient's needs. When fabricating IARPDs using implant as abutment, we could compensate for the shortcomings of existing implant-supported prosthesis retention type and made the design of removable partial denture easy due to using EZ crown system.

Clinical application of laser selective melting titanium alloy for removable partial denture frameworks / 口腔疾病防治

Objective@#To investigate the effect of denture stomatitis of selective laser melting (SLM) titanium alloy for removable partial denture frameworks.@*Methods @#Twenty patients with dentition defects in our hospital were divided into two groups according to the different methods of creating a removable partial denture framework: the SLM group and casting group. The success rate, placement rate, masticatory efficiency and incidence of denture stomatitis were compared. Experimental data were analyzed with SPSS20.0.@*Results @# The success rate of the SLM framework group was 100.00%, which was higher than that of the casting group (90.00%) (P ＜ 0.01). The rate of framework placement in the SLM group was slightly lower than that in the casting group (P ＜ 0.05). The masticatory efficiency of the SLM group was higher than that of the casting group (0.783 ± 0.030 vs. 0.699 ± 0.037, P ＜ 0.001). The incidence of denture stomatitis (10.00%) in the SLM group was significantly lower than that in the casting group (30.00%) (P ＜ 0.001). @*Conclusion @#SLM is superior to the traditional casting method in mastication efficiency and reducing the incidence of denture stomatitis. This method can meet the clinical requirements, but the accuracy of the long-term stent needs to be improved.

Awareness and Knowledge of Dental Implants as an Option for Replacing Missing Teeth: A Survey in Hyderabad, India

Introduction: Awareness among patients regarding use ofimplants is in need and for which effective and adequatecommunication is vital. Aims and Objectives: To gauge theawareness and knowledge regarding dental implants as anoption of treatment to replace missing teeth among patients inHyderabad, India.Material and Methods: A standardized self- explanatoryquestionnaire was prepared and distributed in five dentalclinics of Hyderabad. The questionnaires were handed tothe patients during their regular dental visits. A total of 450subjects were included in this survey.Results: We found that 62.5% (250) patients had someknowledge about dental implants. The main source ofinformation regarding dental implants was form their friendsand relatives (35%; 140 subjects) and dentists being thesecondary source for 30% (120) of the sample. The majorhindering factor that prevents patients from choosing implantswas cost effectiveness in 87.5% (350) of the cases.Conclusion: The awareness and knowledge about dentalimplants in the subjects were acceptable among a selectedsample of dental patients in Hyderabad, India. Still there is aneed for providing more general and accurate information tothe patients about this latest treatment modality

Rehabilitation of mandibular edentulous patients with a few unilateral remaining teeth using implant-assisted removable partial denture: A case report / 대한치과보철학회지

In the case of a patient with a small number of unilateral remaining teeth in the mandible, a restoration with conventional removable partial denture cannot provide sufficient retention and resistance. A harmful stress from the poor stability of denture on remaining teeth occurs due to alveolar bone resorption in edentulous area. Although implant fixed prosthesis can provide multiple benefits over conventional removable partial denture, there are limitations come from anatomic structures and costs. In this case, an implant-assisted removable partial denture (IARPD) with a couple of implants placed in strategic positions can be a treatment modality. The objective of this article is to present a case report of two patients showed satisfactory clinical outcomes during three-year follow-up period describing the fabrication and advantages of removable partial denture assisted by teeth and implants (IARPD) for a patient with a small number of unilateral remaining teeth in mandible using Locator as an implant attachment.

Full mouth rehabilitation utilizing computer guided implant surgery and CAD/CAM / 대한치과보철학회지

Computer aided design and manufacturing and implant surgery using a guide template improve restoration-driven implant treatment procedures. This case utilized those digital technologies to make definitive prostheses for a patient. According to the work flow of digital dentistry, cone beam computed tomography established the treatment plan, which was followed to make the guide template for implant placement. The template guided the implants to be installed as planned. The customized abutments and surveyed fixed restorations were digitally designed and made. The metal framework of the removable partial denture was cast from resin pattern using an additive manufacturing technique, and the artificial resin teeth were replaced with the zirconia onlays for occlusal stability. These full mouth rehabilitation procedures provided functionally and aesthetically satisfactory results for the patient.

Retentiveness comparison of individual clasps made from polyamide, acetate resin and cobalt-chrome for removable partial dentures / Comparação da retenção de grampos individuais de poliamida, resina de acetato e cromo-cobalto para próteses parciais removíveis

Objective: This study aimed to evaluate and compare the retention force of individual clasps made from polyamide, acetate resin and cobalt-chrome for removable partial dentures. Material and methods: Three groups of clasps were fabricated: Cr-Co ­ 10 conventional chrome-cobalt metal clasps; Ac ­ 10 clasps with reciprocal arms and occlusal rests in chrome-cobalt and retentive arms in acetate resin; and Poly - 10 clasps with reciprocal arms and occlusal rests in chrome-cobalt and retentive arms in polyamide resin. Through the tensile test, in a universal testing machine, the initial retention force of the specimens was obtained and then clasps were cycled 7200 times, immersed in artificial saliva (60 months of simulated clinical use). After cycling, tensile test was performed. Results: All groups presented a retention decrease after the cycling. Ac presented a large reduction in retentive force (61.43%), followed by Cr-Co (26.5%) and Poly (12.09%). Conclusions: Aesthetic clasps of polyamide can be used in clinical cases where the anterior supporting teeth will not be essential for good retention of the removable partial denture because this clasp showed to be more resistant than the acetate resin. (AU)

Objetivo: Este estudo teve como objetivo avaliar e comparar a força de retenção de grampos individuais feitos de poliamida, resina de acetato e cromo-cobalto para próteses parciais removíveis. Material e Métodos: Três grupos de grampos foram fabricados: Cr-Co ­ 10 grampos metálicos convencionais de cromo-cobalto; Ac - 10 grampos com apoios e braço de oposição em cromocobalto e braços de retenção em resina de acetato; e Poly - 10 grampos com apoios e braço de oposição em cromo cobalto e braço de retenção em resina de poliamida. Por meio do teste de tração, em uma máquina de ensaio universal, a força de retenção inicial dos espécimes foi obtida e então, os grampos foram ciclados 7200 vezes, imersos em saliva artificial (60 meses de uso clínico simulado). Após a ciclagem, o teste de tração foi realizado. Resultados: Todos os grupos apresentaram diminuição da retenção após a ciclagem. Ac apresentou uma grande redução na força retentiva (61,43%), seguida por Cr-Co (26,5%) e Poly (12,09%). Conclusões: Grampos estéticos de poliamida podem ser usados em casos clínicos em que os dentes de suporte anteriores não serão essenciais para uma boa retenção da prótese parcial removível, pois esse grampo mostrouse mais resistente que os de resina de acetato (AU)

Treatment Outcomes Based on Patient's Oral Health Related Quality of Life (OHRQoL) after Receiving Conventional Clasp or Precision Attachment Removable Partial Dentures in Distal Extension Cases: A Randomized Controlled Clinical Trial / Resultado do tratamento com Prótese Parcial Removível convencional ou com encaixe de precisão, em casos de extremidade livre, baseado no índice de qualidade de vida relacionado á saúde bucal (OHROoL): ensaio clínico controlado e randomizado

Objetivos: Comparar o efeito de duas opções de tratamento (próteses parciais removíveis retidas por encaixe de precisão (PA-RPD) ou grampos (C-RPD) em casos de classe I inferiores de Kennedy em relação à qualidade de vida relacionada à saúde bucal (OHRQoL) e a força de mordida. Material e Métodos: O estudo incluiu 32 pacientes parcialmente desdentados, dos quais 16 receberam PA-RPD (OT Cap Attachment) e 16 pacientes receberam C-RPD. Todos os pacientes de ambos os grupos foram solicitados a preencher o questionário OHRQoL após 1 semana (linha de base), 3 meses, 6 meses e 12 meses após a inserção da prótese. A força de mordida foi medida usando o i-load Star Sensor uma semana, 3 meses, 6 meses e 1 ano após a inserção parcial da prótese em todos os pacientes dos dois grupos. A análise estatística compreendeu o teste U de Mann Whitney, teste de Friedman, teste de Dunn e teste do qui-quadrado. Resultados: Os resultados da OHRQoL revelaram que, no período basal, 3 meses e 6 meses, o PA-RPD apresentou um escore total médio mais baixo estatisticamente significativo do OHIP-14 do que o C-RPD. No entanto, após 12 meses, não houve diferença estatisticamente significante entre os escores totais do OHIP-14 nos dois grupos. Em relação à força de mordida, não houve diferença estatisticamente significante entre os dois grupos. Conclusão: Dentro das limitações deste estudo, concluiu-se que a OHRQoL do PARPD e do C-RPD era comparável após 12 meses. Da mesma forma, a força de mordida foi a mesma para as duas opções de tratamento.(AU)

Objective: To compare the effect of two treatment options in mandibular Kennedy class I cases regarding oral health related quality of life (OHRQoL) and the biting force, removable partial dentures retained by either precision attachment (PA-RPD) or clasps (C-RPD). Material and Methods: The study included 32 partially edentulous patients which 16 patients received PA-RPD (OT Cap Attachment) and 16 patients received C-RPD. All the patients in both groups were asked to fill the OHRQoL questionnaire after 1 week (baseline), 3 months, 6 months and 12 months after prosthesis insertion. Biting force was measured using the i-load Star Sensor one week, 3 months, 6 months and 1 year after partial denture insertion for all patients in both groups. Statistical analysis comprised Mann Whitney U test, Friedman's test, Dunn's test and Chisquare test. Results: The results of OHRQoL revealed that at the baseline, 3 months and 6 months the PA-RPD showed statistically significant lower mean total OHIP- 14 score than the C-RPD. However, after 12 Monthes , there was no statistically significant difference between total OHIP-14 scores in the two groups. Concerning the biting force there was no statistically significant difference between the two groups. Conclusion: Within the limitations of this study it was concluded that the OHRQoL of both the PA-RPD and the C-RPD was comparable after 12 months. Similarly the biting force was the same for both treatment options. (AU)

Vestibuloplasty covering titanium mesh with grafted free gingiva on anterior mandible: technical report and rationale

This paper describes a patient with an insufficient vestibular depth for a removable partial denture who underwent vestibuloplasty with a free gingival graft using a titanium mesh in the anterior mandible. Free gingiva was harvested from the palatal mucosa, and a partial thickness flap was elevated at the recipient site. After minimal suturing for the graft, a titanium mesh was fixed over the graft. The mesh was removed four weeks after surgery. The patient obtained an adequate vestibular depth and keratinized gingiva eight weeks after surgery without any complications. In this case, an appropriate vestibular depth and keratinized gingiva were easily obtained by vestibuloplasty using a titanium mesh.

Restoration of bilateral distal extension removable partial denture using a fixed implant prosthesis in unilateral partial edentulous patient: A case report / 대한치과보철학회지

Traditional removable partial denture is a successful treatment for partial edentulous patients. When the abutment is formed with unilateral minority teeth, satisfaction with the use of removable partial denture may be lowered due to patient's discomfort and damage of the abutment. Recently, it has been reported that the unilateral posterior extension partial denture is used as a bilateral posterior extension partial denture using implant fixed prostheses as abutments. In this case, by using implant surveyed crown prostheses, bilateral posterior extension partial denture is fabricated in site that is predicted to have a poor prognosis. This resulted in improved support, maintenance, and stabilization of the removable partial denture, which were economically beneficial to patient and satisfied with use.

The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report / 대한치과보철학회지

Abutment teeth supporting removable partial denture could be faced a number of problems including development of dental caries. If the existing removable partial denture is in clinically acceptable state and the patient does not want to replace the existing removable partial denture, then a new prosthesis for abutment teeth need to be made. The procedure of fabricating a new prosthesis of abutment teeth for existing removable partial denture is complicate and technically challenging. To fabricate the abutment crown, the original cast of patient obtained before any complication to the abutment teeth is required. The original cast should also contain teeth other than the abutment teeth as a reference point. Once the cast is prepared, CAD/CAM could be used to produce retrofitting prosthesis effortlessly and efficiently. This clinical report presents fabricating a crown to fit existing removable partial denture using CAD/CAM for a patient with post and core failure and dislodged prosthesis. The prosthesis had high stability with minimum adjustment yielding satisfying result.